Needle & Manifold Valves


Home | Manifold Valves | 2-Valve Static Pressure | 2602/2702 Series 2-Valve Mini Block & Bleed, Hard Seat & Soft Tip


2602/2702 Series 2-Valve Mini Block & Bleed Manifold Valves
Hard Seat & Soft Tip (0.141" Orifice)


  • Combines isolating and venting in a single valve, eliminating the need for
    tubing and fittings
  • Block valve isolates the downstream process fluids and the bleed valve exhausts upstream fluids enabling static pressure transmitters, switches or gauges to be
    removed without disturbing the permanent piping installation
  • Valves are located on the top to fit into compact spaces and two holes are
    provided for mounting, venting is to the left
  • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance
    and reliability
  • Soft tip valves feature a patented Delrin® non-rotating soft tip stem, and a
    back-up metal-to-metal seal (U.S. Patent 6,820,857)
  • 2602 Series hard seat valves have 10,000 psi pressure rating @ 200 °F
  • 2702 Series soft tip valves have 6,000 psi pressure rating @ 200 °F
  • Blow-out proof stem provides a secondary stem seal in the full
    open position
  • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from
    corrosion and galling; PTFE or Grafoil® packing optional
  • All stems are 316 stainless steel
  • Stem and bonnet threads are rolled for strength and ease of operation
  • One-piece bonnet with a metal-to-metal seal to the valve body below the
    bonnet threads
  • Slotted spring pin to prevent accidental loosening
  • Vinyl dust caps for bonnets and stems (non-packing)
  • Patented body-to-bonnet, metal-to-metal seal is designed to significantly
    increase the pressure range of the valve (U.S. Patent 7,758,014)
Dimensions  Print Catalog Page



SERIES 2 2-valve        
SEATS 6 Hard seat 7 Soft tip    
PROCESS TYPE 0 Static pressure        
CONNECTIONS 1 1/8" NPT 2 1/4" NPT    
VALVE TYPES FFC Female-Female, Steel FFCR Female-Female, Steel, Right Vent    
FFS Female-Female, Stainless Steel FFSR Female-Female, Stainless Steel, Right Vent    

    Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.

NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 2602-FFC-P1)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.


PACKINGS P1 PTFE P2 Grafoil®**    
STEM TIPS T1 Non-rotating (316 stainless) T5 Ball (440C stainless)** T9 Regulating hard**
T2 Delrin® (Acetal)*** T6 Ball (carbide)** T10 Regulating Delrin®***
T3 PCTFE*** T7 Ball (ceramic)** T11 Regulating PCTFE***
T4 PEEK*** T8 Ball (Monel)** T12 Regulating PEEK***
O-RINGS* EM1 EPDM KZ1 FFKM (Kalrez® 3018 or equivalent) NB1 NBR
HANDLES HL3 1" Round knurled        

    Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

† If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the "Pressure vs Temperature: Packing Style with Compatible Fluid" chart.
*   Other o-ring materials available on request.
**  Hard seat only.
*** Soft tip only.

Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are isolation 1-3/8" mini “T” handles (HL7) and equalizing 1-3/8" mini “T” handles (HL7).

The handle material will always match the material of the valve, unless otherwise specified. For example, the 1-3/8" mini “T” handle (HL7) on the 2602-FFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.

NOSHOK, INC. 1010 W. Bagley Road | Berea, OH 44017 | Ph 440.243.0888 | Fax 440.243.3472 | Webmaster | Site Map