Needle & Manifold Valves

TwitterFacebookLinkedInGoogleDeliciousRSS

Home | Manifold Valves | 2-Valve Static Pressure | 200002/210002 & 200402/210402 Series Narrow Block & Bleed, Hard & Soft Seat

 

200002/210002 & 200402/210402 Series 2-Valve Narrow Block & Bleed Manifold Valves
Hard Seat & Soft Seat

 

  • Combines isolating and venting in a single valve, eliminating the need for
    tubing and fittings
  • Block valve isolates the downstream process fluids and the bleed valve
    exhausts upstream fluids enabling static pressure transmitters, switches
    or gauges to be removed without disturbing the permanent piping installation
  • Block valve is located on the left side and the bleed valve is located on top
    in a 90° orientation, venting is to the right
  • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance
    and reliability
  • 200002/200402 Series hard seat valves have 10,000 psi pressure
    rating @ 200 ºF
  • 210002/210402 Series soft seat valves have 6,000 psi pressure
    rating @ 200 ºF
  • 210002/210402 Series valves also feature a replaceable Delrin® seat, and
    straight through porting for bidirectional, high capacity flow and easy
    roddable cleaning
  • PCTFE or PEEK soft seat optional
  • Blow-out proof stem provides a secondary stem seal in the full open position
  • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Grafoil® packing optional
  • All stems are 316 stainless steel
  • Stem and bonnet threads are rolled for strength and ease of operation
  • One-piece bonnet with a metal-to-metal seal to the valve body below the
    bonnet threads
  • Slotted spring pin to prevent accidental loosening
  • Vinyl dust caps for bonnets and stems (non-packing)
Dimensions  Print Catalog Page

 

ORDERING INFORMATION

SERIES 2 2-valve        
SEATS 0 Hard seat 1 Soft seat    
PROCESS TYPE 0 Static pressure        
CONNECTIONS 0 Flange-flange 2 1/4" NPT-flange 4 1/2" NPT-flange (standard)
VALVE TYPES MFC Flange-Female, Steel MMS Flange-Flange, Stainless Steel MMCL Flange-Flange, Steel, Left Vent
MFS Flange-Female, Stainless Steel MFCL Flange-Female, Steel, Left Vent MMSL Flange-Flange, Stainless Steel, Left Vent
MMC Flange-Flange, Steel MFSL Flange - Female, Stainless Steel, Left Vent    

    Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.

NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 200402-MFC-P1)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.
NOTE 3: T1 Hard non-rotating (316 stainless standard) stem tip is the only option available on the 210002/210402 Series soft seat version.

ORDERING INFORMATION - Additional Options

PACKINGS P1 PTFE P2 Grafoil®**    
STEM TIPS T1 Non-rotating (316 stainless) T6 Ball (carbide)** T8 Ball (Monel)**
T5 Ball (440C stainless) ** T7 Ball (ceramic)** T9 Regulating hard**
O-RINGS* EM1 EPDM KZ1 FFKM (Kalrez® 3018 or equivalent) NB1 NBR
HANDLES HL1 1-13/16" Mini "T" HL4 1-3/8" Phenolic    
  HL3 1" Round knurled HL5 1-3/4" Phenolic    

    Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

† If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the "Pressure vs Temperature: Packing Style with Compatible Fluid" chart.
*  Other o-ring materials available on request.
** For hard seat only.
Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are block “T” handles (HL2) and bleed 1-3/8" mini “T” handle (HL7).
The handle material will always match the material of the valve, unless otherwise specified. For example, the "T" handle (HL2) on the 200402-MFC
will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special
application requests.

NOSHOK, INC. 1010 W. Bagley Road | Berea, OH 44017 | Ph 440.243.0888 | Fax 440.243.3472 | Webmaster | Site Map
©2017 NOSHOK. ALL RIGHTS RESERVED.