Force Measurement

TwitterFacebookLinkedInGoogleDeliciousRSS

Home | Electronic Force Measurement | Custom Force Sensors | Product Specifications

 

Custom Force Sensors
Product Specifications

 

SPECIFICATIONS
Output signal 4 mA to 20 mA 2-wire, 0 Vdc to 10 Vdc 3-wire
0 Vdc to 10 Vdc, 3-wire
Others available - Please consult factory
Nominal ranges 1,000 lbf to 100,000 lbf (5kN to 500 kN), standard
Others available - Please consult factory
Limit force 150% Fnom
Fracture force >300% full scale
Accuracy <1% full scale
Hysteresis <0.5% full scale
Power supply 10 Vdc to 30 Vdc for 4 mA to 20 mA output and 0 Vdc to 5 Vdc output
14 Vdc to 30 Vdc for 0 Vdc to 10 Vdc output
Housing material 316 stainless steel
TemperaturerRatings Storage -4 °F to 176 °F (-20 °C to 80 °C)
Ambient -40 °F to 212 °F (-40 °C to 100 °C)
Response time ≤ 1 ms (between 10% to 90% full scale)
Environmental rating IP 67, NEMA 4X to NE 60529/IEC 529
Electrical protection Reverse polarity, over-voltage and short circuit protection
Vibration 20 g's per IEC 68-2
Electrical connection M12 X 1, 4-pin standard
Others available - Please consult factory

 

 

 

 

 

 

 

 

NOSHOK, INC. 1010 W. Bagley Road | Berea, OH 44017 | Ph 440.243.0888 | Fax 440.243.3472 | Webmaster | Site Map
©2017 NOSHOK. ALL RIGHTS RESERVED.