Force Measurement

TwitterFacebookLinkedInGoogleDeliciousRSS

Home | Electronic Force Measurement | 3540 Series Tension & Compression Force Transducers | Product Specifications

 

3540 Series Tension & Compression Force Transducers
Product Specifications

 

SPECIFICATIONS
Series 3540
Nominal load
kN
lbf
2
450
5
1,124
10
2,248
20
4,496
30
6,744
50
11,240
100
22,481
500
112,404
Limit load 150% full scale
Fracture load >300% full scale
Permissible oscillation ±80% full scale according to DIN 50100
Output signal 4 mA to 20 mA, 2-wire or 3-wire; 0 Vdc to 10 Vdc, 3- wire
Accuracy < ± 0.2% F.S.
Hysteresis < ± 0.1% F.S.
Stability < ± 0.1% F.S. at Fnom
Ambient temperature range -4 °F to 176 °F (-20 °C to 80 °C)
Storage temperature range -4 °F to 212 °F (-20 °C to 100 °C)
Temperature effect - span
                                   - zero
< ± 0.01% Fnom / °F
< ± 0.01% Fnom / °F
Vibration effect 20 g, 100 h, 50 Hz to 150 Hz according to IEC68-2-6-Fc
Environmental protection IP 67 according to EN 60 529 /IEC 529
Electrical connection M12 x 1 or cable
Power supply 10 Vdc to 30 Vdc for 4 mA to 20 mA output
14 Vdc to 30 Vdc for 0 Vdc to 10 Vdc output
Current consumption 4 mA to 20 mA, signal
0 to 10 Vdc, 8 mA
Response time <1 ms (within 10% to 90% Fnom)
Noise protection CE compliant; RFI, EMI and ESD protected according to EN 61326
Electrical protection Short circuit, overvoltage and reverse polarity protection
Material 17-4PH Stainless steel

 

 

NOSHOK, INC. 1010 W. Bagley Road | Berea, OH 44017 | Ph 440.243.0888 | Fax 440.243.3472 | Webmaster | Site Map
©2017 NOSHOK. ALL RIGHTS RESERVED.