Diaphragm Seals

TwitterFacebookLinkedInGoogleDeliciousRSS

Home | Diaphragm Seals | Bolted, Replaceable | Type 10/10H Standard & Elevated Pressure | Product Specifications

 

Type 10/10H Standard & Elevated Pressure, Bolted, Replaceable Diaphragm Seals
Product Specifications

 

PRODUCT SPECIFICATIONS
Seal type Threaded with replaceable diaphragm. Flanged available on request.
Instruments Type Size Minimum Pressure Maximum Pressure
Gauges 2-1/2" to 6" 0 psig to 30 psig 0 psig to 2,000 psig (10H - 5,000 psig)
Transducers - 0 psig to 30 psig 0 psig to 2,000 psig (10H - 5,000 psig)
Switches - 0 psig to 30 psig 0 psig to 2,000 psig (10H - 5,000 psig)
Upper housing Type Non-continuous duty (10H continuous duty)
Connections 1/4" NPT, 1/2" NPT
Materials Polyurethane enamel coated steel, 316 Stainless steel
Diaphragm Size 3.0" (Type 10), 2-1/2" (Type10 H)
Displacement 3.2 ml (Type 10), 1.4 ml (Type 10H)
Materials 316 Stainless steel (Exotic materials available on request)
O-rings   NBR, PTFE and FKM
Lower housing Connections 1/4" NPT, 1/2" NPT, 3/4" NPT, 1" NPT, 1-1/4" NPT, 1-1/2" NPT
ASME flanges available on request
Materials Polyurethane enamel coated steel and 316 Stainless steel (Exotic materials available on request)
Flushing port Optional 1/8" NPT, 1/4" NPT and dual ports
Bolting   Zinc-plated steel, optional Stainless steel
Operating temperature   Operating temperature is determined by the temperature/pressure configuration.
See Material temperature table.

 

 

 

 

 

NOSHOK, INC. 1010 W. Bagley Road | Berea, OH 44017 | Ph 440.243.0888 | Fax 440.243.3472 | Webmaster | Site Map
©2017 NOSHOK. ALL RIGHTS RESERVED.