Pressure Measurement

TwitterFacebookLinkedInGoogleDeliciousRSS

Home | Sanitary Pressure Transmitters | 11 Series ASME-BPE Sanitary Clamp | Product Specifications

 

11 Series ASME-BPE Sanitary Clamp Pressure Transmitters
Product Specifications

 

Caution

NOSHOK pressure transmitters or transducers are not to be used in heat sterilization systems
as stated in 3A Standard 74-03 paragraph D10.1.2


Diaphragm seal must be installed facing downward or in a vertical position for drainability.
Do not install diaphragm seal facing in an upward position.

 

SPECIFICATIONS
Output signals 4 mA to 20 mA 2-wire, 0 Vdc to 5 Vdc 3-wire, 1 Vdc to 5 Vdc 3-wire,
1 Vdc to 6 Vdc 3-wire, 0 Vdc to 10 Vdc, 3-wire, 1 Vdc to 11 Vdc 3-wire
Pressure ranges Vacuum through 0 psig to 400 psig
Accuracy ±0.25% full scale (BFSL); Optional ±0.125% full scale (BFSL); (Includes the effects of non-linearity, hysteresis, non-repeatability, zero point and full scale errors)
Stability ±0.2% full scale for 1 year, non-accumulating
Adjustment ±10% full scale for zero and span
Response time < 10 ms
Service life > 100,000,000 load cycles
Temperature ranges Compensated 32 °F to 175 °F (0 °C to 80 °C)
Effect ±0.01%/°F for zero and span
Media -40 °F to 300 °F (-40 °C to 150 °C)
Ambient -40 °F to 176 °F (-40 °C to 80 °C)
Storage -40 °F to 212 °F (-40 °C to 100 °C)
Power requirement* 10 Vdc to 30 Vdc (4 mA to 20 mA, 2-wire, 0 Vdc to 5 Vdc, 3-wire, 1 Vdc to 5 Vdc, 3-wire, 1 Vdc to 6 Vdc, 3-wire)
14 Vdc to 30 Vdc (0 Vdc to 10 Vdc, 3-wire, Vdc to 11 Vdc, 3-wire)
Load limitations ≤ (VPower -10)/0.020 Amp for 4 mA to 20 mA output
≤ 5,000 Ω for 1 Vdc to 5 Vdc output
≤ 10,000 Ω for 0 Vdc to 10 Vdc output
≤ 4,500 Ω for 0.5 Vdc to 4.5 Vdc output
Proof pressure 3 times full scale for 0 psig to 2 psig through 0 psig to 200 psig
1.75 times full scale for 0 psig to 300 psig through 0 psig to 400 psig
Burst pressure 3.8 times full scale for 0 psig to 2 psig through 0 psig to 200 psig
4 times full scale for 0 psig to 300 psig through 0 psig to 400 psig
Measuring element 316 stainless steel
Connection 316 stainless steel
Housing material 316 stainless steel
Environmental rating IP65
Electromagnetic rating CE compliant to EMC norm EN 61326:1997/A1:1998
RFI, EMI and ESD protection
Electrical protection Reverse polarity, overvoltage and short circuit protection
Shock 1,000 g’s according to IEC 60068-2-27
Vibration 15 g’s according to IEC 60068-2-6
Weight Approximately 1.1 lb.

    * Unregulated

NOSHOK, INC. 1010 W. Bagley Road | Berea, OH 44017 | Ph 440.243.0888 | Fax 440.243.3472 | Webmaster | Site Map
©2017 NOSHOK. ALL RIGHTS RESERVED.